+91 94437 49422

eptalbert@gmail.com

SORTING MACHINE

KEY FEATURES:

DESIGN -It is a specially designed Circular Gyratory Equipment that can sort upto 8 Grades of

MOTOR & MOTOR BASE - A unique designed Vibratory motor with eccentric weights and Screening Decks with different Meshes one above the other are mounted on a Motor Base consisting of Compression Springs in Bottom base.

MOTOR SHAFTS - The Motor consists of double extended Shafts at both the end fitted with Eccentric weights at different Lead Angles.

SCREENING SYSTEM -The Screening System consists of 5 to 8 Screening Decks with Screening Cloth attached with Screening Meshes of various sizes starting from the Higher open area on the Top followed by the Smaller and till continues till the Least.The Screen rings are secured firmly with Special Adhesives to the Screening Decks affixed with rigid Stainless Steel Clamps.

BOLTLESS RINGS -To prevent loss of Bloom Boltless Rings can be used. FUNNELS - To increase the Resident Time and to enhance sorting. Funnels ensure the materials discharge onto the centre of the screen and thus providing enough time to move towards periphery.

FUNNELS -To increase the Resident Time and to enhance sorting. Funnels ensure the materials discharge onto the centre of the screen and thus providing enough time to move towards periphery.

STANDARD CTC GRADES

GRADES

WIIRE MESH SIZE

WHILE MESH SIZE
BPS Through 6, above 8 Mesh 6 X SWG 20              Mesh 8 X SWG 22
BOPL (a)Through 8, abovel0 (or) (b)Through 10, above 12 (a)Mesh10 X SWG 24 (or) (b)Mesh 10 X SWG 22 to 23
BOP (a)Through 10, above 12 (or) (b)Through 12, above 14 (a)Mesh10 X SWG 24 (or) (b)Mesh 12 X SWG 23 to 25
BOPsm (a)Through 10, abovel2 (or) (b)Through 12, above 14 (a)Mesh12 X SWG 24 (or) (b)Mesh 14 X SWG 23 to 25
BP (a)Through 12, above l8 (or) (b)Through 14, above 18 (a)Mesh18 X SWG 26 (or) (b)Mesh 14 X SWG 23 to 25 / (b)Mesh 18 x SWG 26
BPsm Through 18, above 20 Mesh 18 X SWG 27 to 28
OF (a)Through 18, above24 (or) (b)Through 20, above 24 (a)Mesh24 X SWG 28 (or) (b)Mesh 20 X SWG 28 to 30
PF (a)Through 18, above24 (or) (b)Through 20, above 24 (a)Mesh24 X SWG 28 (or) (b)Mesh 20 X SWG 28 to 30
PD Through 24, above 30 Mesh 30 X SWG 28 to 35
D Through 30, above 40 Mesh 40 X SWG 35
CD Through 40, above 50 Mesh 50 X SWG 37

TECHNICAL SPECIFICATION

MODEL

AL SORT- 24

ESAL SORT - 36

ESAL SORT- 48
DIA OF SCREEN DECK [Mtr] 0.6 0.9 1.2
DISCHARGE SPOUT PITCH [Mtr] 0.4 0.55 0.75
FEED INLET DIA [Mtr] 0.2 0.2 0.25
DISCHARGE SPOUT DIA [Mtr] 0.2 0.2 0.25
BOTTOM BASE DIA [Mtr] 0.5 0.7 0.9
BOTTOM BASE HEIGHT [Mtr] 0.25 0.25 0.4
BOTTOM DECK DISCHARGE HEIGHT [Mtr] 0.4 0.4 0.55
HEIGHT OF TOP DECK [Mtr] 0.2
TOTAL HEIGHT OF 5 DECK MACHINE [Mtr] 1 1 1.3
TOTAL HEIGHT OF 7 DECK MACHINE [Mtr] 1.2 1.2 1.5
MOTOR POWER [HP] 0.5 0.5 1.5
CAPACITY [KG/Hr] 100 250 500
 

*  Due to Continuous Development Process the Design is subject to change without notice.


Advantages:

Its Versataltiy replaces the Conventional Machines.

It can be easily installed in any Sorting Room of the Industry.

Low Power Consumption

High Capacity and Reduced Space Requirement.

Minimum Screen Blinding.

Re-sorting not necessary.

No loss of Bloom

Almost Zero maintenance.

Interchangeable Screening Decks and Frames